Recycle ADI Isolation IC:Isolated ADC,Isolated Gate Driver,Isolated Regulator & Controller
ADI’s isolation devices are built on the company’s proprietary iCoupler® chip-scale transformer isolation technology. Unlike traditional optocoupler and pulse transformer solutions, they offer higher common-mode transient immunity (CMTI), lower power consumption, smaller temperature drift, and longer service life. They also support integrated signal isolation and isoPower isolated power supply, making them widely used in industrial automation, photovoltaic inverters, energy storage converters, automotive on-board chargers (OBCs), motor drives, power monitoring, AI computing power supplies, and high-voltage medical data acquisition—all of which require isolation between high- and low-voltage domains and safety insulation.
I. Isolated Analog-to-Digital Converters (Isolated ADCs)
Isolated ADCs isolate the analog sampling front end, the ADC core, and the digital interface. They acquire current and voltage signals on the high-voltage side, while the MCU on the low-voltage side safely reads the data. This eliminates the need for external isolators and simplifies the high-voltage sampling signal chain. The mainstream types are divided into two categories: Σ-Δ isolated ADCs (for power/current sampling) and isolated SAR ADCs.
Representative Models and Key Features
1. AD7403 (Single-Channel Σ-Δ Isolated ADC)
Utilizes iCoupler isolation and is specifically designed for high-voltage-side current sampling via shunt resistors, making it suitable for phase current monitoring in IGBT and SiC power circuits; With high-speed bitstream output, it delivers high-precision current values when paired with ADI digital filters. It offers excellent CMTI performance and is a classic current-sampling device for photovoltaic inverters, servo motors, and energy storage converters. Suitable for automation equipment applications.
2. ADE9112 / ADE9113 (Multi-Channel Synchronous-Sampling Isolated Σ-Δ ADCs with Integrated isoPower)
The ADE9112 is a 2-channel, and the ADE9113 is a 3-channel isolated synchronous-sampling Σ-Δ ADC. They feature an on-chip isoPower isolated DC-DC converter, eliminating the need for an additional isolated power supply to power the high-voltage sampling side; they support multi-chip daisy-chain synchronization and SPI with CRC checksum, offering strong immunity to interference. They are used in high-precision energy metering, power grid power quality monitoring, and data acquisition in high-voltage switchgear. Suitable for automation equipment applications.
3. AD7400A / AD7401A
Classic second-generation Σ-Δ isolated ADCs with fixed-modulation bitstream output and a compact form factor. They are suitable for low-cost industrial inverters and bus voltage/current acquisition in charging stations, with a proven track record in long-term, high-volume applications.
Key Advantages
- Isolation medium rated for up to 5 kVrms, meeting safety standards for functional isolation and reinforced insulation;
- Isolation between the high-voltage analog front end and the digital section prevents ground loops and suppresses high-power switching noise interference;
- The integrated isoPower version can simultaneously power high-voltage-side sensors and operational amplifiers, significantly reducing the number of external components;
- Synchronous sampling architecture enables controllable phase error in multi-phase power systems.
Typical Applications
PV inverters, energy storage PCS, industrial servo drives, high-voltage data acquisition for new energy vehicle BMS and OBC, power protection measurement and control, and high-precision isolated data acquisition cards.
II. Isolated Gate Drivers
Isolated gate drivers are used to drive power switching devices such as IGBTs, SiC MOSFETs, and GaN HEMTs. They isolate the low-voltage logic on the control side from the high-voltage bus on the power side, providing strong pull-up and pull-down current drive capabilities, Miller clamping, fault detection, and BIST self-diagnosis. They are core components in high-voltage power conversion. ADI offers drive solutions covering the full range of power devices, including IGBTs, SiC, and GaN.
Representative Models and Key Features
1. ADuM4177 (Isolated gate driver specifically designed for SiC; newly introduced flagship model)
5.7 kVrms isolation, wide-body SOIC package, 8.3 mm creepage distance; 40 A pull-up current and 30 A sink current; supports slew rate control and built-in BIST self-test; suppresses high-frequency switching ringing in SiC devices; suitable for high-voltage SiC inverters, automotive main inverters, and energy storage converters; supports 1500 V DC bus systems. Designed for automotive ADAS applications.
2. ADuM4135 / ADuM4138 (Single-Channel Isolated IGBT Gate Driver)
Optimized specifically for IGBTs, with built-in Miller clamping to reliably turn off IGBTs from a single power supply and suppress false Miller turn-on triggers; features a fault feedback channel that allows the controller to monitor the driver status in real time. Widely used in high-power inverters, wind power converters, and UPS systems. Suitable for automation equipment applications.
3. ADuM7223 (Isolated Half-Bridge Gate Driver)
Integrates isolated high-side and low-side drivers in a single package, with a drive capability of 4 A per channel and minimal channel skew. Suitable for small- to medium-power half-bridge circuits, totem-pole PFC, and bidirectional DC-DC converters, with a compact PCB layout. Suitable for automation equipment applications.
4. ADuM4121-1 (General-Purpose High-Speed Isolated Gate Driver)
Supports drive voltages up to 35 V, features Miller clamping, and has short propagation delay, making it suitable for GaN devices, high-frequency compact power supplies, and high-frequency resonant converters. Suitable for powering AI computing and high-density cloud computing servers.
Key Advantages
- iCoupler isolation eliminates the aging and attenuation issues associated with optocouplers, making it suitable for high-frequency and long-life operating conditions;
- High CMTI (typically > 100 kV/μs), minimizing the risk of false triggering during high-speed switching of SiC/GaN devices;
- Integrated protection features including Miller clamping, active pull-down, fault detection, dead-time control, and BIST;
- Multiple architecture options available, including single-channel, half-bridge, and dual independent channels, compatible with IGBTs, SiC, and GaN.
Typical Applications
Main inverters for new energy vehicles, on-board chargers (OBC), PV string inverters, energy storage converters, high-power industrial inverters, high-frequency GaN power supplies, and wind turbine pitch drives.
![]()
III. Isolated Regulators and Isolated Power Supply Controllers
ADI’s isolated power supply controllers fall into two main categories: one integrates an isolator, PWM controller, and transformer driver; the other consists of dedicated isolated topology controllers (ADP series) designed for isolated DC-DC regulated power supplies, where primary-side control and secondary-side voltage regulation feedback are transmitted across the isolation barrier, eliminating the need for optocoupler feedback.
Representative Models and Key Features
1. ADuM3470–ADuM3474, ADuM4470–ADuM4474 (isoPower Integrated Isolated Voltage Regulator Controllers)
Four digital isolation channels + on-chip PWM controller and transformer driver; when paired with an external transformer and rectifier diodes, they provide an isolated regulated output; The ADuM4471 features built-in isolated PWM feedback and loop compensation, with an adjustable output voltage of 3.3 V to 24 V, a maximum power of approximately 2.5 W, and efficiency up to 80%; it supports soft start, pulse-by-pulse current limiting, and thermal shutdown, with 5 kVrms isolation, making it suitable for supplying low-power power to isolated ADCs, isolated op-amps, and secondary-side gate drivers. It is suitable for automation equipment applications.
2. ADP1071 (Isolated Flyback Controller)
An iCoupler-isolated flyback power controller with programmable CCM/chopped mode and slope compensation, featuring a wide input voltage range. It is suitable for industrial auxiliary power supplies and charging station auxiliary power, eliminating the need for an optocoupler feedback loop. Suitable for automation equipment applications.
3. ADP1074 (Active-Clamped Synchronous Forward Isolated Controller)
A current-mode, fixed-frequency, active-clamped forward controller that uses isolated signal transmission to replace optocouplers and signal transformers. Suitable for medium- to high-power, high-density isolated DC-DC converters; commonly used in communication power supplies and industrial power modules to reduce BOM costs and PCB area. Suitable for powering AI computing and high-density cloud computing servers.
Key Advantages
- The isolated feedback loop is based on iCouplers, eliminating issues associated with optocouplers such as temperature drift, aging, and bandwidth limitations;
- The isoPower device combines a digital isolation channel with an isolated power supply, providing both signal isolation and a low-power isolated power supply in a single device;
- Built-in comprehensive protection: soft start, overcurrent, over-temperature, and input under-voltage lockout;
- Supports a wide range of programmable output voltages, suitable for analog front-ends, isolated sampling, and secondary-side power supply requirements for gate drivers.
Typical Applications
Secondary-side power supply for isolated sampling units, isolated auxiliary power supply for gate drivers, isolated power supply for industrial I/O modules, isolated power supply for medical devices, isolated auxiliary power supply on server boards, and isolated power supply for sensors.
IV. General Technical Highlights of ADI Isolators (iCoupler® vs. Traditional Solutions)
1. Isolation Principle: Wafer-level microtransformers; signals are transmitted via magnetic coupling; no light-emitting components; lifespan is not limited by light decay;
2. Insulation Ratings: Multiple levels ranging from 3 kVrms to 5.7 kVrms, corresponding to various safety standards (IEC 60747, UL 61800, etc.) ;
3. CMTI: Significantly higher than standard optocouplers, offering greater immunity to common-mode noise generated by high-frequency SiC/GaN switching;
4. All-in-One Integration Approach: Signal isolation + isoPower power supply, isolation + ADC, isolation + gate driver, and isolation + PWM power controller—these represent the differentiating features of ADI’s isolation solutions, helping designers achieve highly integrated, compact power and data acquisition systems.
[Recycling Services]
Shenzhen Mingjiada Electronics Co., Ltd. has been deeply involved in the components industry for many years. Leveraging the strengths of its distribution channels, the company operates a components recycling business, specializing in the professional disposal of idle inventory, factory surplus, R&D surplus, returned goods, and customs-confiscated materials, helping customers efficiently liquidate idle electronic assets.
We have a professional component evaluation team familiar with part numbers across numerous brands. We are experts in identifying, verifying batches, and assessing the quality of components for automotive, industrial, communications, AI servers, and humanoid robots. Using specialized testing equipment, we verify authenticity, functionality, and package condition. Pricing is based on real-time global supply and demand trends; we reject blind weight-based valuation and avoid on-site price-cutting, ensuring objective and reliable evaluation results.
Our comprehensive recycling portfolio covers MCUs, memory chips, power management ICs, isolators, data converters, RF chips, GaN/SiC power devices, sensors, modules, connectors, passive components, and more. We accept orders of all sizes—from entire warehouses of bulk obsolete inventory to scattered R&D samples and small quantities of leftover materials. No pre-sorting or screening is required by the customer, significantly reducing labor and warehousing costs for businesses.
Leveraging our global supply chain network, we eliminate multiple layers of intermediaries, ensuring our quotes closely reflect actual market value and offering a distinct competitive advantage. With ample capital reserves and flexible transaction models, we support solutions such as on-site inspection and inventory counting, shipping materials for testing via courier, and complete factory liquidation. Upon receipt and verification of the materials, we provide prompt payment through various settlement methods, helping businesses quickly recover funds and minimize losses caused by inventory depreciation and storage costs.
We maintain a robust compliance and confidentiality system, holding ISO 9001 and ISO 14001 certifications. We are well-versed in the regulations governing the disposal of bonded materials and goods returned to the port, and can provide the necessary compliant transaction documentation. We strictly maintain confidentiality regarding clients’ bill of materials (BOM), part numbers, and supply chain information throughout the entire process to prevent data leaks, making us an ideal partner for long-term, stable collaboration with manufacturing plants, traders, R&D companies, and customs clearance and supply chain firms.
We offer highly efficient service response. Based in Shenzhen, we serve the Pearl River Delta and the entire country, with coordinated support from our Hong Kong and overseas offices. We quickly facilitate on-site inspections, inventory counts, and handover procedures. Clients need only provide their inventory BOM list to receive a prompt evaluation and quote, offering a one-stop solution for disposing of idle electronic component inventory.
اتصل شخص: Mr. Sales Manager
الهاتف :: 86-13410018555
الفاكس: 86-0755-83957753